Insights
Guidance for building owners, factory managers and engineers: what to check, what it costs and what the codes require.
- PEB Steel vs RCC for Factories in Bangladesh: Cost, Speed and Performance ComparedPre-engineered steel or reinforced concrete? A practical comparison of cost, construction time, spans, loads and lifetime value for factory owners in Bangladesh.Cost & budgeting, 3 min read
- 10 Warning Signs Your Building Needs Structural RetrofittingCracks, sagging, corrosion stains, changes of use — learn the warning signs that a building in Bangladesh needs an engineering assessment and strengthening.Retrofitting, 3 min read
- Earthquake Resilience in Bangladesh: What BNBC 2020 Means for Your BuildingBangladesh sits near active plate boundaries. Here is what the BNBC 2020 seismic provisions mean for new construction and for existing buildings.Seismic safety, 2 min read
- How to Plan an Industrial Construction Budget in Bangladesh: A Step-by-Step GuideFrom land and soil reports to contingencies and VAT, a practical framework for building a realistic factory construction budget in Bangladesh.Cost & budgeting, 2 min read
- What Is a Detailed Engineering Assessment (DEA) — and When Do You Need One?A DEA tells you what an existing building can safely carry. Learn what it involves, how long it takes and what the report should contain.Retrofitting, 2 min read
- CFRP vs RC Jacketing vs Steel Jacketing: Choosing a Column Strengthening MethodThree proven ways to strengthen deficient concrete columns. Compare strength gain, space, speed, disruption and durability to pick the right one.Retrofitting, 2 min read
- Soil Investigation Before Factory Construction: Why It Pays for ItselfBoreholes, SPT values and lab tests decide your foundation type — and often your budget. Here is what a soil investigation covers and why skipping it is costly.Industrial construction, 2 min read
- Adding Floors to an Existing Building: The Structural Checks You Cannot SkipVertical extension is common in Bangladesh — and a leading cause of overloaded structures. Here is how to check whether your building can safely take more floors.Retrofitting, 2 min read
- Pre-Engineered Steel Buildings (PEB) Explained: Components Every Factory Owner Should KnowPrimary frames, purlins, girts, bracing, sheeting and anchor bolts — a plain-language guide to how a pre-engineered steel building is put together.Industrial construction, 2 min read
- How to Read a Bill of Quantities (BOQ): A Guide for Building OwnersA BOQ turns drawings into measurable, priced items. Learn how it is structured, what to check, and how to compare contractor bids fairly.Cost & budgeting, 2 min read
- Structural Safety in RMG Factories: Lessons Since Rana Plaza and the Role of the RSCHow the garment sector's structural safety programmes changed engineering practice in Bangladesh — and what factory owners should expect today.Seismic safety, 2 min read
- Non-Destructive Testing (NDT) for Concrete Buildings: Methods, Uses and LimitsRebound hammer, UPV, ferro-scanning, cores and half-cell tests — what each method tells you about an existing concrete structure, and what it cannot.Retrofitting, 2 min read
- Warehouse Design in Bangladesh: Clear Spans, Racking Loads and Floor SlabsA warehouse is only as good as its floor and its clear height. Key design decisions for modern storage and logistics buildings in Bangladesh.Industrial construction, 2 min read
- Concrete Quality Control on Site: Slump, Cylinders, Curing and CoverMost concrete problems are created on site, not in the design office. The practical QC checks that make the difference between specified and actual strength.Quality & compliance, 2 min read
- Fire Safety and Structural Design for Industrial BuildingsHow structure and fire safety interact in factories and warehouses — fire resistance, protecting steel, exits, compartments and coordination with MEP.Quality & compliance, 2 min read
- Protecting Steel and Concrete from Corrosion in Bangladesh's ClimateHeat, humidity, monsoon rain and coastal salt make corrosion a leading cause of structural deterioration. Practical protection for steel and RCC structures.Industrial construction, 2 min read
- Bridge Strengthening and Rehabilitation: An Overview for Asset OwnersIncreasing traffic loads, scour and ageing materials challenge bridges across Bangladesh. How bridges are assessed and strengthened to extend their service life.Infrastructure, 2 min read
- Rebar Grades in Bangladesh: 60 Grade, 75 Grade and 500W Explained"60 grade", "72.5 grade", "500W" — what the names mean, why higher-strength bars are not always interchangeable, and how to check what arrives on site.Quality & compliance, 2 min read